Stainless steel embossed mesh belongs to the stainless steel braided mesh series, which is woven with stainless steel wires such as 304.304L.316L.316.

　　There are various specifications for stainless steel embossed mesh weaving, in addition to material, there are also wire diameter, mesh holes, length and width, etc. Generally, users will provide specification parameters, or you can tell us where the embossed mesh products are used. Our staff will recommend the stainless steel embossed mesh specifications that are suitable for you according to your requirements. The common specifications of stainless steel embossed mesh in the market include mesh holes of 1-24 mesh, wire diameter of 0.4-6.0mm, and width of 1-5 meters. There are many types of specifications that can be customized. The stainless steel embossed woven mesh adopts the method of first pressing and then weaving to form: bidirectional bending, bidirectional wave isolation bending, and unidirectional bending. It has the advantages of heat resistance, acid resistance, alkali resistance, wear resistance, and sturdy structure. Stainless steel embossed mesh has two types of shapes: rolled and mesh. It can be roughly divided into two categories based on weaving: one is called whole woven embossed mesh, and the other is called stepped embossed mesh. The whole woven embossed net refers to a single mesh with no wavy twists and turns at the center, while the stepped embossed net refers to a single mesh with one or more wavy twists and turns. The whole woven embossed net is often used for small and large embossed nets with large silk holes, while the stepped embossed net is often used for small and large embossed nets with small silk holes. The central state can be used for whole weaving or stepped embossing. In most cases, the use of whole woven embossing and stepped embossing is not different. Whole woven embossed mesh and stepped embossed mesh can be substitutes for each other. The difference lies in the slightly softer surface of the whole woven embossed mesh, but its wear resistance is more durable than that of the stepped embossed mesh. Therefore, the choice of usage location needs to be based on different points.